We R Memory Keepers Gift Box Punch Board

Hi, guys. It's been...busy...around here. Obviously by "around here" I mean around my house and not around here on the blog, because, well, I've had a few other things going on. Like putting down the last of the new flooring (in the kitchen) and painting ceilings (also the kitchen), and more painting, painting, painting, PAINTING (like, everywhere). We are slowly but surely getting there though. Just a few more little things and we will be ready to list.

So between that and the soul freezing winter weather Tennessee has been hit with lately, things have been a little uncrafty. But last night I finally had a chance to sit down and put together a post about one of my favorite crafty tools, the We R Memory Keepers Gift Box Punch Board.

First of all, I want to make a disclaimer - these pictures, guys, they're not my favorite. Late night crafting with incandescent lighting is almost always a bad combo, but we work with what we've got here. And my poor, poor kitchen table that is (somewhere) on the to-do list to get a makeover makes for a pretty lame backdrop. What's really sad is that my mom passed this table on to us several years back, and when she did she had just refinished it. Three kids, one crafting momma, and all the abuse of being a staging area during our house revamp has left it looking a bit worse for the wear. No judgment though, someday she'll have a fresh white coat of paint (if I have anything to do with it), and all will be redeemed.

So anyway, that out of the way, here's the Gift Box Punch Board.

Source

My mom bought me this board for my birthday, and I love it! In fact, I bought my SIL Leah one for Christmas. Basically it makes a self closing box (no separate lid!) with one square of paper. And they can be made in a variety of sizes of course, depending on your starting paper size and the shape instructions you choose.

I started out with a 6x6 sheet I cut down from this fun Disney paper. I scored the whole 24 sheet pad at a local dry goods store for $1.99!

As always with the WRMK punch boards, the instructions are printed right on the board, and the score tool stores in a slot on the underside of the board, so there's nothing to keep track of.

I chose to make a 1.75 x 1.75 x 1.75 inch box. Based on that, here are the measurement instructions to follow.

Using this board is a lot like using the Envelope Punch Board - just punch and score. It's important to pay attention to the line instructions, because they may not both be the same depending on your box size. If your box is taller or shorter than it is wide, your start and diagonal lines will be different.

Start out by lining the left edge of your paper up with the appropriate start line, in this case the small (S) line.

Punch using the button.

Now score using the tool along all three score lines, the two lines leading off the button (follow the little guides trailing off the button to find the grooves) and the diagonal line.

Now rotate your paper 90 degrees to the left and repeat all steps.

This is what your paper will look like at this point.

Also, our paper is small enough to fit entirely on the punch board, but if you're making a bigger box, there is an arm that swings out to extend your score line surface.

Now, flip it over and do all the punching and scoring again.

Now you have two notches on each side.

Here you can see the score lines a little better.

Now insert each corner into the punch at the top of the button and punch again to cut the curved slits you will need to lock the box flaps together. It's very important to make sure your corner is well seated into the corner of the punch before punching, otherwise your slits will be off and the corner will not round well.

Just make sure you have the same side of the paper facing up during the punching of each corner. This is what it should look like at this point.

Go ahead and crease your scored lines, starting with the longest ones.

Now bring your sides up and crease the diagonal lines inward so they are toward the inside of the box.

You can leave these interior flaps as is if you would like the box to be able to be flattened back out when opened, but I like to adhere them with either glue or an adhesive runner. I find it easiest to go ahead and add the adhesive to all 4 sides before folding up the box.

If you look closely, you can see the lines of adhesive.

When folded up, they will adhere the interior flaps to the sides of the box.

Now you will gently hook the opposite flaps together using the curved slits we punched earlier. Be careful here as these can be easy to tear, especially if you used thinner paper.

All done! Isn't it cute? This size is perfect for gifting jewelry, or it would be just right for holding a cake ball or truffle at a wedding or baby shower. 

Since you can't see the date on that ring, we're going to say I graduated 5 years ago.

Here's one I didn't adhere the sides on. Okay, fine, I graduated in '95. Whatever.

I made a whole stack of these for Lily, who loves anything Disney. And now I'm kicking myself for not buying up all the cheapo paper stacks!

These are really cute using just about any paper. Here's one I made using some cool printed vellum I found at Tuesday Morning.

Oh, and how cute would these be in craft paper for a gender reveal party, with a pink or blue cupcake inside? So many possibilities! I can't get enough of these punch boards, and I can't wait to see if they come out with any more!