Monday, November 24, 2014

Pinwheel Punch Board



A couple months ago I heard that We R Memory Keepers was coming out with a new punch board: The Pinwheel Punch Board! I was so excited that I immediately emailed them to ask if they might be willing to send me one to review here on the blog. The very sweet lady who responded to me told me that they didn't currently have a budget for reviews on that product, but she would be happy to send me one to try anyway! I was so excited!


I got busy playing with it right away, but I wanted to wait until I could get a hold of a set of the pinwheel attachments before I told you all about it here. Unfortunately, once the punch boards hit the craft stores, the attachment sets were sold out everywhere I went. I finally found some in stock last time I went to Hobby Lobby, so I'm ready to show you how it works!


First of all, you can make pinwheels in many different sizes, using paper from 3 to 12 inches square. Today I'm going to show you one using 6x6 paper, which makes a pinwheel the same size you would normally find at the store. Of course you might ask, why not just go get one at the store for $1? Well, because those shiny numbers at the store can't complete with the gorgeous papers combinations you can come up with on your own! I chose these two sheets in fun fall colors. Here they are front and back.



First of all, raise the arm on the punch board.


Now slide the corner of your paper under the red button, square it up and punch.



Now punch the other four corners. Repeat for the other paper. The side of the papers that is facing up when you punch it will be the side that shows in the center of your pinwheel.


Back side of bird paper.


Now line your first paper up with the corresponding mark on the left side of the punch board.

Bring the arm down so that it pokes a hole through the center of your paper and anchors it in place.


Insert the included blade tool in the track, with the blade to the left of the track like so.



Slide it down the track, cutting the paper until the track ends.


Without lifting the arm, turn the paper 90 degrees and repeat. On half of the turns the corner will not line up exactly with the measurement mark - that's okay. Just make sure that the notch in the paper sits over the blade track. Repeat on the other two corners.



Back view so you can see the cuts better.
Now raise the arm and remove your first piece of paper. Repeat with the other paper, but this time you will be working on the right side of the punch board.



Now, lay your papers face down, one on top of the other at a 90° angle, like this. The paper you slit using the right side of the punch board (here the floral/purple sheet) will go on the bottom.


Make sure the holes in the centers line up.


Now, take one of the skinny sections of the bottom sheet and weave it up through the slit in the top paper just above it. Continue the maneuver, working clockwise, all the way around the pinwheel.





Now you want to add the whole thing to your attachment assembly. The attachments come with enough sets to make 10 pinwheels. At $4.99 a pack (Hobby Lobby), that puts your pinwheels at 49¢ each, if you have your paper on hand. That's already cheaper than the store, but if you use a lovely 40% off coupon like I did, then you get 10 pinwheels for $2.99, an even better deal! It's hard to beat a 29¢ toy!


The attachments have three parts, and they assemble like this:



Once you have the head seated on the straw and the spindle attached to that, slide your papers onto the spindle, still face down.


Now, take one of your hole-punched sections from the top sheet (here the yellow paper), pull it forward, and thread it onto the spindle.


Now take the skinny section from the bottom paper directly to the right of the section you just pulled forward and do the same thing. Repeat all the way around, moving clockwise and alternating between the front paper and the back.



Once all the hole punched sections are threaded onto the spindle, press on the end cap.


You're all done!


Look at it spin!




Here's what it looks like on the back. If you'd like your pattern to show on the blades instead of the center, just make sure the pattern is face down when you punch your paper.


Of course you can also just do this with one paper, which will make a 4 blade pinwheel, also adorable. If you do so, you need to work on the left side of the punch board when using the blade.

This punch board has been so much fun! Best of all, the attachments are reusable, so if say, your two year old crumples up beyond repair the pinwheel you made him, you can pull the assembly apart and make a new one! You can also use just about any paper straw out there, which really opens up your color/design options - although those 15 inch gray and white striped ones in the kit are super awesome!

Of course you can certainly make pinwheels without the attachments - they just won't spin. But they do make gorgeous decorations! You can anchor the center with a fun decorative brad. I can see some little stationary ones attached to paper flags to make up an awesome baby shower banner, and what fun props they would make for a photo shoot! Or you could even attach them right to a memo board with a colorful push pin! Oh, and what about gift toppers? And cards? The possibilities are endless!

We R Memory Keepers provided me with a Pinwheel Punch Board to try, but they did not compensate me for my review (or even ask for it), and all opinions are my own.

Wednesday, November 19, 2014

Therapeutic Crafting

Life is best for me when I take time to make things. Sometimes when I get overwhelmed with kids and housework and errands and everything that goes with having a full, although beautiful life, I have to put myself in front of my sewing machine or turn on my glue gun or pull out my jewelry wire, or just create something that wasn't there before. It doesn't have to be anything big or elaborate, but just the process of making something appealing is balm to my soul. This past week or so has been full of tiny projects. Excuse some of the photos as cell phone pics not actually intended for the blog. :)

I've made up a few hair bows, like these Frozen themed ones. My friend Amy's little girls were going to see Frozen on Ice that evening, and she called and asked if she could bring me some ribbon and have me come up with some quick bows to match their dresses.


She also dropped off a roll of this Christmas ribbon she found at the thrift store for 49¢, so I made this one too.


Her youngest daughter is turning three in a few days and will be celebrating with a Jake and the Neverland Pirates themed party, so I made this one for the birthday girl.

I made Lily this woven headband to match my niece's Thanksgiving headband. Clearly this is one of the not-actually-taken-for-the-blog-pics. 


And I found this velvet ribbon in my stash, and I don't think I'd ever laid eyes on it before. Sometimes people pass along to me random craft supplies they're getting rid of. Like this one time my Aunt Tina gave me bags full of vintage lace and trim and ribbon and fabric remnants and it was basically the best thing ever. And I don't think this ribbon came from her, but it found its way to me in much the same manner, and I kind of love it, so thank you to whoever gave it to me. I made this sweet bow that is going to look awesome with some little girl's pretty velvet Christmas dress!


I made my niece this ginormous rosette headband using the remnants of the blanket I made her. It's so soft!



My friend Rebecca asked me to make her daughter a leather and stamped copper cuff. She couldn't decide which color she wanted so I made up an extra leather strap she can switch the plate out on if she likes.


I also made myself a new pincushion out of this sweet little vintage tart tin I found at a thrift store. I have some similar cupcake tins I plan on turning into pincushions too, so I will do a tutorial in the near future.


I've been playing with the Gift Box Punch Board my mom got me for my birthday, and I'll do a tutorial on it coming up. So fun!


And I finally found the pinwheel attachments to use with the Pinwheel Punch Board, so that will be on the blog soon too!


My daughter Taylor has been feeling a bit crafty herself. She made this sweet paper banner that says ROACH FAMILY. And why yes, that is a sippy cup so fetchingly displayed on my mantle. Don't be jealous.


She also made these awesome scrapbook paper snowflakes and decorated the wall at the stair landing. I love how unique and festive they all are!




What sort of crafts do you find relaxing and therapeutic?